Reconstruction of piano hammer force from string velocity
Full item page
-
Abstract
- A method is presented for reconstructing piano hammer forces through appropriate filtering of the measured string velocity. The filter design is based on the analysis of the pulses generated by the hammer blow and propagating along the string. In the five lowest octaves, the hammer force is reconstructed by considering two waves only: the incoming wave from the hammer and its first reflection at the front end. For the higher notes, four- or eight-wave schemes must be considered. The theory is validated on simulated string velocities by comparing imposed and reconstructed forces. The simulations are based on a nonlinear damped stiff string model previously developed by Chabassier, Chaigne, and Joly [J. Acoust. Soc. Am. 134(1), 648–665 (2013)]. The influence of absorption, dispersion, and amplitude of the string waves on the quality of the reconstruction is discussed. Finally, the method is applied to real piano strings. The measured string velocity is compared to the simulated velocity excited by the reconstructed force, showing a high degree of accuracy. A number of simulations are compared to simulated strings excited by a force derived from measurements of mass and acceleration of the hammer head. One application to an historic piano is also presented.
- Date Issued 2016
-
Authors
Chaigne, Antoine | University of Music and Performing Arts Vienna
- DOI 10.1121/1.4965965
- Language en
- License CC-BY-4.0
- Subjects Musical instruments Acceleration measurement Vibrometer Wave propagation Signal processing Transducers Magnetic materials Spectroscopy Integral transforms Partial differential equations